Burst Pipe Emergency: What to Do in the First Hour

By the Pros Rem Team | Fort Walton Beach, FL

A burst pipe is one of the most stressful things a homeowner can face. Water pours into walls, floors, and ceilings, and every minute makes the damage worse. A single broken supply line can release hundreds of gallons in an hour, soaking drywall, flooring, insulation, and belongings before you have had time to think.

The good news is that what you do in the first hour can make a huge difference. Acting quickly and calmly can limit the damage, protect your family, and make your insurance claim and repairs much easier.

This guide walks you through the first hour step by step, then explains what to do next, how to avoid common mistakes, and how to prevent the next emergency. It was written for homeowners in Fort Walton Beach, Destin, Mary Esther, Shalimar, Niceville, Santa Rosa Beach, Miramar Beach, and across the Emerald Coast.

This article offers general guidance. In any emergency involving electricity, gas, flooding, or structural danger, put safety first and call 911 or your utility company.

If You Are Dealing With a Burst Pipe Right Now

Here is the short version. Read this first, then come back for the details.

  1. Shut off the main water supply. This is the most important step.
  2. Stay safe around electricity. If water is near outlets, fixtures, appliances, or your panel, do not touch them while standing in water.
  3. Turn off your water heater if water is still draining from the system.
  4. Open faucets to drain remaining water from the pipes, once the main valve is closed.
  5. Call a licensed plumber to find and repair the break.
  6. Take photos and video of the damage before you clean up.
  7. Remove standing water and protect belongings, if it is safe.
  8. Call your insurance company and a water damage restoration company.

Now let us go through each step.

Minutes 0 to 5: Stop the Water

Every minute that water runs, the damage grows. Stopping the flow is your first priority.

Find and close the main shutoff valve

The main shutoff valve controls all the water entering your home. Its location varies, but common places include:

  • Near the water heater
  • In a garage, utility room, or laundry room
  • On an exterior wall where the water line enters the house
  • In a basement or crawl space, where one exists
  • In a hose bib area or in a utility closet
  • At the water meter, which is typically in a box near the street or the edge of your property

Two common types of valves:

  • A ball valve has a lever handle. Turn it a quarter turn so the handle sits perpendicular to the pipe to close it.
  • A gate valve has a round wheel handle. Turn it clockwise until it stops.

If you cannot find or turn the valve inside the house, the utility’s shutoff at the meter box may work. It may require a special tool, and in some places only the utility is supposed to operate it. Call your water utility right away if you cannot shut the water off yourself.

If you live in a condo or townhome

Find the shutoff valve for your unit, and call building management or your HOA immediately. Water can spread to neighbors below and beside you, so speed matters, and building staff may be able to shut off a riser or the whole building.

If you are away

If you are traveling, or you own a seasonal or vacation home, ask a neighbor, property manager, or family member to shut off the water and check the home, and consider the prevention steps later in this article.

Minutes 5 to 15: Make the Home Safe

Water and electricity are a dangerous combination. Before you start cleaning, make sure you are safe.

Electricity

  • Do not step into standing water if outlets, appliances, cords, or the electrical panel might be underwater or wet.
  • Turn off the power only if it is safe. If you can reach your breaker panel through dry areas, shut off power to affected rooms or the whole house.
  • If the panel is wet or the route to it is flooded, do not go near it. Call your electric utility or a licensed electrician.
  • Never use electrical appliances in wet areas, including wet-dry vacuums, until the area is safe.
  • Watch ceilings. Water pooling above a light fixture or in a ceiling can drip through wiring. Avoid switches and fixtures in affected rooms.

Structure

  • Stay out from under a bulging or sagging ceiling. Saturated drywall is very heavy and can collapse without warning. Do not try to puncture it yourself. Call a professional, and keep people and pets away.
  • Watch for slippery floors, and wear shoes with good traction.
  • If water has reached a significant part of the home, or you smell gas or see signs of structural damage, leave and call 911 or the appropriate emergency service.

Water heater

Once the water is off, a draining water heater can be damaged if it runs with no water. Turn off the power to an electric water heater at the breaker, or set a gas water heater to the pilot setting or turn off its gas valve, as the manufacturer directs.

Drain the lines

After the main valve is closed, open the faucets at the highest and lowest points in the house to drain any water still in the pipes. This relieves pressure and reduces the amount that continues to leak. Flush toilets once or twice to empty the tanks.

Minutes 15 to 30: Call for Help and Document

Call a licensed plumber

You need a plumber to find the break and repair it. Plumbing is regulated in Florida, so hire a licensed professional. Verify the license at MyFloridaLicense.com and ask for proof of insurance. In an emergency, it is tempting to take the first person who answers, so be careful, especially after storms or freezes when scammers appear. Our guide on how to choose a remodeling contractor in Fort Walton Beach explains how to check credentials and avoid red flags.

Document everything before you clean

Your photos and notes are the foundation of your insurance claim, and they will also help your repair team understand what happened. Before you move or throw away anything:

  • Take wide shots and close-ups of every affected room, including ceilings, walls, floors, and belongings.
  • Record a video walkthrough, narrating what you see.
  • Photograph the broken pipe and the source of the leak, if you can see it.
  • Note the time you discovered the leak and when you shut off the water.
  • Back up your photos to the cloud.

Our guide to how to document hurricane damage for your insurance claim covers documentation in detail, and the same approach applies to a plumbing leak.

Minutes 30 to 60: Contain the Damage

Once the water is off, the home is safe, and the plumber is on the way, begin limiting the damage. Many insurers expect homeowners to take reasonable steps to prevent further loss.

  • Remove standing water. Use buckets, mops, towels, or a wet-dry vacuum rated for water, only in areas where it is safe from electrical hazards.
  • Move belongings to a dry area. Rugs, furniture, electronics, books, and papers are priorities. Photograph them first.
  • Lift furniture. Place foil or plastic under legs on wet floors, so stain and moisture do not transfer.
  • Remove wet rugs, cushions, and loose items so air can reach the floor.
  • Open cabinets and doors to promote airflow, particularly under sinks and around the leak.
  • Run fans and dehumidifiers, if power is safe.
  • Use your air conditioning, if the system and electrical conditions are safe.
  • Save receipts for anything you buy for the emergency response.

Do not start tearing out drywall or flooring without guidance. Demolition decisions depend on what is wet, how long it has been wet, and what your insurer requires. A restoration professional can measure moisture and tell you what to remove and what can dry in place.

What to Do Next: Insurance and Restoration

Call your insurance company

Report the loss as soon as you reasonably can. Ask for a claim number, and write down the name of everyone you speak with. Florida law and your policy set deadlines for reporting, so do not wait.

A few general points about coverage:

  • Many homeowners policies cover sudden and accidental water damage, such as a pipe that bursts, but coverage varies, and long-term or slow leaks are often treated differently.
  • Your policy may cover damage that results from the leak, but not the cost of repairing the pipe itself.
  • Policies often require you to protect the property from further damage.
  • Flood damage from outside water, such as storm surge, is different, and usually needs a separate flood policy.

Ask your insurer what documentation they need, whether they require an adjuster before repairs, and which emergency services they cover. Read anything you are asked to sign before you sign it, especially anything that transfers your insurance rights to a contractor.

Call a water damage restoration company

Professional drying is important, because water travels farther than you can see, into walls, insulation, and subfloors. A restoration team can:

  • Extract standing water with professional equipment
  • Use air movers and dehumidifiers to dry the structure
  • Measure moisture in walls and floors with meters
  • Identify materials that need to be removed and those that can be saved
  • Document the process for your insurer

Why Speed Matters: The 24 to 48 Hour Window

Water from a burst supply line starts out relatively clean, but it does not stay that way. As it sits in building materials, bacteria can grow, and the risk of mold rises. The U.S. Environmental Protection Agency notes that mold can begin to grow within 24 to 48 hours on damp materials. In Florida’s humid climate, the risk can be even higher.

That is why the first hour matters, and why professional drying within the first day or two is so valuable.

  • Drywall absorbs water and can soften, bubble, and crumble.
  • Insulation holds moisture against framing.
  • Flooring can warp, buckle, or trap moisture, depending on the material.
  • Cabinets and baseboards made from particleboard or MDF swell quickly.
  • Carpet and padding may need to be removed if not dried quickly.

Our guides explain what happens next: water damaged drywall and flooring: repair or replace, mold and mildew on walls, and drywall repair vs. replacement.

Common Mistakes to Avoid

  • Waiting to shut off the water. Every minute adds damage.
  • Entering standing water near electricity.
  • Standing under a bulging ceiling.
  • Cleaning up before taking photos.
  • Throwing away damaged items without documenting them.
  • Ignoring hidden moisture. A wall can feel dry and still be wet inside.
  • Delaying the call to your insurer.
  • Starting demolition without guidance.
  • Painting or covering wet surfaces, which traps moisture and invites mold.
  • Hiring the first person who answers, without checking credentials.
  • Signing paperwork you do not understand.
  • Assuming the problem is over when the water stops. Drying and repairs still need to happen.

Common Causes of Burst Pipes in Florida

Understanding why pipes fail can help you prevent the next one.

  • Aging and corrosion. Older copper, galvanized steel, and cast iron pipes can wear out over time.
  • Polybutylene pipe. Some homes built roughly between the late 1970s and the mid-1990s have this type of plastic pipe, which has a history of failure. If your home is from that era, ask a plumber to evaluate it.
  • High water pressure. Pressure that is too high stresses pipes and fittings. A plumber can test it and install a pressure regulator.
  • Slab leaks. Pipes under a concrete slab, which is common in Florida, can corrode or shift and leak without warning.
  • Freezing. Cold snaps are rare in the Panhandle, but they do happen, and homes here are often less prepared for them. Exposed pipes in attics, garages, and outdoor walls are the most at risk.
  • Tree roots and ground movement, which can damage underground lines.
  • Poor installation or worn fittings.
  • Storm damage. Hurricanes can shift and damage plumbing, especially in older homes.

How to Prevent a Burst Pipe

A little preparation can prevent a very expensive day.

  • Know where your main shutoff is, and make sure everyone in the house does too. Test it once or twice a year to make sure it turns.
  • Label your shutoff valves so anyone can find them quickly.
  • Install leak detectors near water heaters, sinks, toilets, washing machines, and dishwashers. Some systems also include automatic shutoff valves.
  • Have your water pressure checked, and install a regulator if needed.
  • Inspect visible pipes and hoses for corrosion, bulges, and drips. Replace worn washing machine hoses.
  • Have older plumbing evaluated, especially if your home has polybutylene, galvanized, or old copper pipes.
  • Prepare for cold snaps. Insulate exposed pipes, let faucets drip when temperatures drop below freezing, open cabinet doors under sinks, and disconnect outdoor hoses.
  • If you leave for a while, shut off the main water supply, or ask someone to check the home regularly. This matters most for seasonal and vacation homes.
  • Do not ignore small leaks. A drip often signals a larger problem.

After the Emergency: Rebuilding

When the plumber has repaired the pipe and the structure is dry, the rebuilding phase begins. Depending on the damage, that may include removing and replacing drywall, insulation, flooring, baseboards, and cabinets, followed by priming and painting. Our guide to rebuilding after a hurricane explains the right order of repairs, which applies to any water loss, and our guide to the best flooring for Florida homes can help you choose materials that handle moisture well.

It also helps to plan the money side. Our guide on how to budget for a home remodel explains how to compare estimates and keep a contingency for hidden damage.

See the Repaired Space Before You Rebuild

After a water emergency, decisions pile up: flooring, paint, trim, and finishes. Pros Rem uses AI-powered visual previews, starting from photos of your own home, so you can see how different colors and flooring could look in your actual space before work begins. That can make it easier to move forward after a stressful event.

Had a Burst Pipe? Talk to Pros Rem

Once the water is off and the plumber has fixed the leak, we can help with the rest.

Pros Rem handles water damage restoration and rebuilding, including drywall repair and replacement, flooring, trim, tile, and painting, all with a single point of contact. We are not a plumbing company, so you will still need a licensed plumber for the pipe itself, but we can take it from there. We provide clear written estimates, so you know exactly what is included before work begins.

Frequently Asked Questions

What should I do first if a pipe bursts? Shut off the main water supply right away. Then make sure the home is safe around electricity, drain the lines, call a licensed plumber, and document the damage.

Where is my main water shutoff valve? Common locations include near the water heater, in a garage or utility room, on an exterior wall where the line enters the house, or at the water meter near the street. Find yours before you need it.

Is it safe to turn off the electricity during a water leak? Only if you can reach the panel through dry areas without touching water. If the panel or the path to it is wet, stay away and call your utility or a licensed electrician.

Will homeowners insurance cover a burst pipe? Many policies cover sudden and accidental water damage, but not the cost of repairing the pipe itself, and long-term leaks are often treated differently. Check your policy and call your insurer promptly.

How long does it take for mold to grow after a burst pipe? Mold can begin to grow within 24 to 48 hours on damp materials, which is why quick drying is important.

Can I dry the water damage myself? Small, quick leaks may be manageable with towels and fans, but water often spreads into walls and floors where you cannot see it. A professional can measure moisture and confirm that everything is dry.

Should I cut a hole in a bulging ceiling to let the water out? No. A saturated ceiling can collapse and may have electrical wiring above it. Stay out from under it, and call a professional.

Should I call a plumber or a restoration company first? Call a plumber to stop and repair the leak, and call a restoration company to dry and repair the damage. You can make both calls at once.

Final Thoughts

A burst pipe is an emergency, but it does not have to become a disaster. Shut off the water, stay safe around electricity, call a licensed plumber, document everything, and start drying quickly. Then work with your insurer and qualified professionals to repair and rebuild. And afterward, take a few simple steps to prevent it from happening again.

If you need help rebuilding after water damage, our team at Pros Rem is here to help you every step of the way. Call us at (850) 428-8158 or request your free estimate.

Pros Rem Services by City